2 Press ato turn loudness on.
LOUD indicator is displayed.
#To turn loudness off, press b.
#You can also turn loudness on or off by press-
ing and holding EQ.
3 Press cor dto select a desired level.
LOW (low)HI (high)

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!Settings are based on the FM tuner volume
level, which remains unchanged.
!The AM tuner volume level can also be ad-
justed with source level adjustments.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
3 Press aor bto adjust the source vo-
lume.
SLA +4 SLA 4is displayed as the source vo-
lume is increased or decreased.

Other Functions

Setting the clock

Use these instructions to set the clock.
1 Press SOURCE and hold until the unit
turns off.
2 Press AUDIO and hold until clock ap-
pears in the display.
3 Press cor dto select the segment of
the clock display you wish to set.
Pressing cor dwill select one segment of the
clock display:
HourMinute
As you select segments of the clock display
the segment selected will blink.
4 Press aor bto set the clock.
Pressing awill increase the selected hour or
minute. Pressing bwill decrease the selected
hour or minute.
#To cancel clock settings, press BAND.
#You can also cancel clock settings by holding
down AUDIO until the unit turns off.

Turning the clock display on or

off

You can turn the clock display on or off.
%Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
#The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Operating this unit
En 13
English
Section
03