Pioneer DEH-2800MP Basic Operations, Tuner

Basic Operations
Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 9).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD playerTuner
When you select a source, the unit is turned
on.
Notes
!When no disc has been set in the unit, the
source will not switch to the built-in CD player.
!When this units blue/white lead is connected
to the vehicles auto-antenna relay control
terminal, the vehicles antenna extends when
this units source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%Use VOLUME to adjust the sound level.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Tuner
Listening to the radio
243
15
1Band indicator
Shows which band the radio is tuned to, AM
or FM.
2LOC indicator
Shows when local seek tuning is on.
3Stereo (5) indicator
Shows when the selected frequency is
being broadcast in stereo.
4Frequency indicator
Shows the frequency to which the tuner is
tuned.
5Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
2 Press BAND to select a band.
Press BAND until the desired band (F1,F2,F3
for FM or AM) is displayed.
3 To perform manual tuning, briefly press
cor d.
4 To perform seek tuning, press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by briefly pressing
cor d.
#If you press and hold cor dyou can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Operating this unit
En 7
English
Section
03