Built-in Player

Playing a disc

1 2
When playing a CD
1
4 5 2
3
When playing an MP3/WMA/WAV disc
1Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2Track number indicator
Shows the track (file) currently playing.
!If a track number 100 or more is selected,
dwill light up above the last two digits
of the track number.
3Folder number indicator
Shows the number of folder currently play-
ing.
4MP3 indicator
Shows when an MP3 file is playing.
5WMA indicator
Shows when a WMA file is playing.
1 Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
#Be sure to turn up the label side of a disc.
#After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
#You can eject a CD (CD-ROM) by pressing
EJECT.
2 Press aor bto select a folder when
playing an MP3/WMA/WAV disc.
#You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
#To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3 To perform fast forward or reverse,
press and hold cor d.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on page 11.)
4 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!The built-in CD player plays one standard, 12-
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 14.
!There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read, FRMTREAD is displayed.
!When playing discs with MP3/WMA/WAV files
and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be
played only by switching mode between MP3/
WMA/WAV and CD-DA with BAND.
!If you have switched between playback of
MP3/WMA/WAV files and audio data (CD-DA),
playback starts at the first track on the disc.
!The built-in CD player can play back an MP3/
WMA/WAV file recorded on CD-ROM. (Refer
to page 14 for files that can be played back.)
Operating this unit
En 9
English
Section
03