Pioneer DEH-3400 Tuner, Listening to the radio, Italiano, Nederlands, Français, BAND indicator

Tuner

Listening to the radio

12 3 4

1 BAND indicator

Shows which band the radio is tuned to, AM or FM.

2FREQUENCY indicator

Shows to which frequency the tuner is tuned.

3PRESET NUMBER indicator

Shows what preset has been selected.

4STEREO () indicator

Shows that the frequency selected is being broadcast in stereo.

1 Press SOURCE to select the tuner.

2	Use VOLUME to adjust the sound level.	English
Rotate to increase or decrease the volume.
3	Press BAND to select a band.

Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM.

4 To perform manual tuning, press 2 or 3	Español
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3 for about one second and release.
The tuner will scan the frequencies until a	Deutsch
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.	Français
• When the frequency selected is being broad-
Note
cast in stereo the STEREO () indicator will
light.
	Italiano

Nederlands

En 8