Pioneer DEH-P3600 Adjusting loudness, Using subwoofer output

1 Press AUDIO and hold until frequency
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2 Press AUDIO to select B.
Press AUDIO until Bappears in the display.
3 Press cor dto select the desired fre-
quency.
Press cor duntil the desired frequency ap-
pears in the display.
4063100160 (Hz)
Selecting treble frequency
You can select the treble frequency for level
adjustment.
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2 Press AUDIO to select T.
Press AUDIO until Tappears in the display.
3 Press cor dto select the desired fre-
quency.
Press cor duntil the desired frequency ap-
pears in the display.
2k4k6k10k (Hz)
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Press AUDIO until LOUD appears in the dis-
play.
2 Press ato turn loudness on.
Loudness level (e.g., LOUD :MID) appears in
the display.
3 Press cor dto select a desired level.
Each press of cor dselects level in the fol-
lowing order:
LOW (low)MID (mid)HI (high)
4 Press bto turn loudness off.
LOUD :OFF appears in the display.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1 Press AUDIO to select SUB, W.
When the subwoofer controller setting is
P/O :FUL, you cannot select SUB, W. Press
AUDIO until SUB, W appears in the display.
2 Press ato turn subwoofer output on.
SUB, W:NOR appears in the display. Subwoo-
fer output is now on.
#If the subwoofer output phase has been set to
the reverse, SUB, W:REV will be displayed.
#To turn subwoofer output off, press b.
3 Press cor dto select the phase of sub-
woofer output.
Press cto select reverse phase and REV ap-
pears in the display. Press dto select normal
phase and NOR appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1 Press AUDIO to select 80: 0.
When the subwoofer output is on, you can se-
lect 80: 0. Press AUDIO until 80 appears in
the display.
Audio Adjustments
En
30
Section
07