Pioneer Sub-woofer Setting Adjustment 80HZ DEH-P410, Front Image Enhancer Function FIE

Audio Adjustment

Sub-woofer Setting Adjustment (80HZ) (DEH-P410)

When the Sub-woofer output is ON, you can adjust the output level of Sub-woofer.

1.Press the AUDIO button and select the Sub-woofer setting mode (80HZ) in the Audio Menu.

2.Increase or decrease the output

level with the 5/° buttons.

The display shows “+ 6” – “– 6”.

Note:

•You can select the Sub-woofer setting mode only when Sub-woofer output is switched ON in the Sub-woofer ON/OFF mode.

Front Image Enhancer Function (FIE)

The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their out- put to low-range frequencies. You can select the frequency you want to cut.

Precaution:

•When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in vol- ume.

1.Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio Menu.

2.Switch the F.I.E. function

ON/OFF with the 5/° buttons.

“FIE”

3. Select the desired frequency with the 2/3 buttons.

100 ï 160 ï 250 (Hz)

Note:

•After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced.

•Switch the F.I.E. function OFF when using a 2-speaker system.

31