Using the Built-in CD Player

Scan Play (T-SCAN)

Scan Play plays the first 10 seconds or so of each track on a CD in succession.

1.Press the FUNCTION button and select the Scan mode (T-SCAN) in the Function Menu.

2.Switch the Scan Play ON with

the 5 button.

3. When you find the desired track, cancel the Scan Play with the ° button.

If the Function Menu has been can- celed automatically, select the Scan mode in the Function Menu again.

Note:

• Scan Play is canceled automatically after all the tracks on a disc have been scanned.

Pause (PAUSE)

Pause pauses the currently playing track.

1.Press the FUNCTION button and select the Pause mode (PAUSE) in the Function Menu.

2.Switch the Pause ON/OFF

with the 5/° buttons.

Disc Title Input (TITLE IN)

You can use “TITLE IN” to input up to 48 disc titles for CDs in the Built-in CD player. (Perform the same operation as (described) on page 24 under “Using Multi-CD Players”.)

Note:

After the title for 48 discs have been entered, data for a new disc will overwrite the oldest one.

If you connect a Multi-CD player, you can input disc titles for up to 100 discs.

19

Page 20
Image 20
Pioneer DEH-P5250 operation manual Scan Play T-SCAN, Pause Pause, Disc Title Input Title