Pioneer DEH-P5900IB optional amplifier, When using a Subwoofer without using the, English

Connecting the Units

ENGLISH

7	When not connecting a rear speaker lead to a
Subwoofer
		Interface cable (e.g., CD-I200)
iPod with Dock	Dock connector port	(sold separately)
Connector	2 m (6 ft. 7 in.)	Gray

Power amp (sold separately)

Power amp (sold separately)

7

optional amplifier

iPod with Dock Connector

When using a Subwoofer without using the

	Interface cable (e.g., CD-I200)
Dock connector port	(sold separately)
2 m (6 ft. 7 in.)	Gray
	15 cm (5-

Dock connector This product

15 cm (5-

7/8 in.) AUX jack (3.5 ø)

Dock connector

This product 7/8 in.) AUX jack (3.5 ø)

Rear output

Front output Antenna jack

Subwoofer output

Fuse (10 A)

	Use a stereo mini plug cable
	to connect with auxiliary
equipment.
			Wired remote input
			Hard-wired remote control
			adaptor can be connected (sold
(Blue)			separately).
				Multi-CD player
IP-BUS cable				(sold separately)

Power amp (sold separately)

Connect with RCA cables (sold separately)

Subwoofer output	Use a stereo mini plug cable
Front output	to connect with auxiliary
	equipment.
Antenna jack

Subwoofer output		Wired remote input
		Hard-wired remote control
Fuse (10 A)	IP-BUS input	adaptor can be connected (sold
	(Blue)	separately).
		Multi-CD player
	IP-BUS cable	(sold separately)

Yellow/black

If you use an equipment with Mute function, wire this lead to the Audio

Blue/white

System remote control

Yellow/black

If you use an equipment with Mute function, wire this lead to the Audio

Blue/white

Connect to system control terminal of the power

Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.

Yellow

Connect to the constant 12 V supply terminal.

Red

Connect to terminal controlled by ignition switch (12 V DC).

Orange/white

Connect to lighting switch terminal.

Black (chassis ground)

Connect to a clean, paint-free metal location.

With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.

Perform these connections when using the optional amplifier.

Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).

+		+
Front speaker				Front speaker
	≠		≠
	White		Gray
+		+
Front speaker				Front speaker
	≠		≠
	White/black		Gray/black
Left				Right
	Green		Violet
+		+
Rear speaker				Rear speaker
	≠		≠
	Green/black		Violet/black
+		+		Rear speaker
Rear speaker
	≠		≠
+		+
Subwoofer				Subwoofer
	≠		≠

Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.

Yellow

Connect to the constant 12 V supply terminal.

Red

Connect to terminal controlled by ignition switch (12 V DC).

Orange/white

Connect to lighting switch terminal.

Black (chassis ground)

Connect to a clean, paint-free metal location.

Note:

Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural.

amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).

	White		Gray
+		+
Front speaker				Front speaker
	≠		≠
	White/black		Gray/black
Left				Right
	Green		Violet
+		+
Subwoofer (4 Ω)				Subwoofer (4	Ω)
	≠		≠
	Green/black		Violet/black

When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything with Green and Green/black leads.

Green	Violet	+
Not used.			Subwoofer
			(4 Ω) ⋅ 2
Green/black	Violet/black	≠