2 PressMULTI-CONTROL to select the de-
siredchannel select setting.
PressMULTI-CONTROL repeatedly to switch
betweenthe following channel select settings:
Channelnumber (channel number select set-
ting)Category(channel categor y select
setting)
#Youcan also select the XM channel select set-
tingby pressing and holding CLOCK.

Selecting a channel in the

channel category

1 Selectthe channel select settings to
Category.
Referto Swiching the XM channel select
settingon the previous page.
2 PushMULTI-CONTROL up or down to
selectthe desired channel category.
3 PushMULTI-CONTROL left or right to
selectthe desired channel in the selected
channelcategory.
Displaying the Radio ID

Channel number select setting

Ifyou select CH : 000,the ID code is displayed.
%PushMULTI-CONTROL left or right to
selectCH : 000.

Channel category select setting

RADIOID is provided as a channel categor y
fordisplaying the ID code.
%PushMULTI-CONTROL up or down to
selectRADIO ID from channel category.
#Ifyou select another channel, display of the ID
codeis canceled.
#Displayof the ID code repeats displaying
RADIOID and the ID code one after the other.
Selecting stations from the
preset channel list
Thepreset channel list lets you see the list of
presetstations and select one of them to re-
ceive.
1 PressLIST to switch to the preset chan-
nellist mode during the channel display.
2 UseMULTI-CONTROL to select the de-
siredstation.
Turnto change the station; press to select.
#Youcan also change the station by pushing
MULTI-CONTROLup or down.
#Ifyou do not operate the list within about 8
seconds,the preset channel list mode is can-
celedautomatically.
Notes
!Youcan also recall stations assigned to preset
tuningnumbers by pushing MULTI-CONTROL
upor down during the channel display.
!Youcan also recall stations assigned to preset
tuningnumbers by pressing one of the preset
tuningbuttons 16on the remote control.
XM tuner
En
44
Section
09