Listening to XM Satellite Radio
5
5
5
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
Youcan use this unit to control an XM satellite
digitaltuner (GEX-P920XM), which is sold
separately.
Fordetails concerning operation, refer to the
XMtuner s operation manuals. This section
providesinformation on XM operations with
thisunit which differs from that described in
theXM tuner s operation manual.
!Withthis unit, you can operate two addi-
tionalfunctions: XM channel direct selec-
tionand preset channel list.
1XMband indicator
Showsthe XM band which has been
selected.
2XMchannel number indicator
Showsto which XM channel number the
tuneris tuned.
3XMpreset number indicator
Showswhat XM preset has been selected.
4XMchannel select setting indicator
Showswhat channel select setting has
beenselected. CH is displayed when
Channelnumber is selected, and CAT is
displayedwhen Category is selected.
5XMtext information
Showsthe text information of broadcast
channel.
1 PressSOURCE to select the XM.
PressSOURCE until you see XM displayed.
2 PressBAND to select a XM band.
PressBAND repeatedly until the desired XM
bandis displayed, XM-1,XM-2 or XM-3.
3 Toperform tuning, push
MULTI-CONTROLleft or right.
Thechannels move up or down step by step.
Channelsthat cannot currently be selected
areskipped, and the next channel is selected.
#Ifyou push and hold MULTI-CONTROL left or
right,you can increase or decrease channel num-
bercontinuously.
#Youcan also perform tuning from a desired
channelcategory. (Refer to Selecting a channel in
thechannel category on page 44.)
Selecting an XM channeldirectly
Youcan select an XM channel directly by en-
teringthe desired channel number.
1 PressDIRECT on the remote control.
CHANNELINPUT appears in the display.
2 Use09 on the remote control to input
thedesired channel number.
#Tocancel the input numbers, press CLEAR on
theremote control.
3 Whilethe input number is displayed,
pressDIRECT on the remote control.
Theentered XM channel is selected.
XM tuner
En
42
Section
09