Set the positions of the controls, etc., as shown below.
Browser section
Names of controls, etc. | Position | 1 | 2 | 1 |
|
|
|
HEADPHONES MIX control | Center |
HEADPHONES LEVEL control | Turned fully counterclockwise |
Adjust the sound level output from the headphones to an appropriate level.
3
4
1LOAD button
2Rotary selector
3BACK (VIEW) button
4LOAD PREPARE (AREA) button
NoteThis unit and the Serato DJ software include a variety of functions enabling individualistic DJ performances. For details on the respective functions, see the operating instructions and the Serato DJ software manual.
This unit’s operating instructions can be downloaded from the Pioneer DJ support site. For details, see Downloading this unit’s oper- ating instructions (p. 14).
The Serato DJ software manual can be downloaded from Serato. com. For details, see Downloading the Serato DJ software manual (p. 14).
Quitting the system
1 Quit Serato DJ.When the software is closed, a message for confirming that you want to close it appears on the computer’s screen. Click [Yes] to close.
2Switch the [ON/OFF] switch on this unit’s rear panel to the [OFF] side to turn this unit’s power off.
3Disconnect the USB cable from your computer.Names of Parts
Deck section
This section is used to control the four decks. The buttons and controls for operating decks 1 and 3 are located on the left side of the controller, those for operating decks 2 and 4 are located on the right side of the controller.
12En
1VINYL button
2Jog dial
3DECK 1 button
The deck on the right side has a [DECK 2] button.
4DECK 3 button
The deck on the right side has a [DECK 4] button.
5SHIFT button
6SYNC button
7CUE button
8PLAY/PAUSE "button
9HOT CUE mode button
aROLL mode button
bSLICER mode button
cSAMPLER mode button
dPerformance pads
e PARAMETER button, PARAMETER button
fBeat indicator
g1/2X (IN) button
h2X (OUT) button
iAUTO LOOP button
jPAD PLUS ON button
kPAD PLUS TAP button
lKEY LOCK button
mSLIP button
nTEMPO slider