Pioneer DDJ-SR, DJ Controller components, etc.), 4 Turn on the computer’s power, 3 Connect this unit to your computer via a USB cable

2Connect powered speakers, a power amplifier, components, etc., to the [MASTER OUT1] or [BOOTH OUT/MASTER OUT2] terminals.

5Switch the [ON/OFF] switch on this unit’s rear panel to the [ON] side to turn this unit’s power on.

Powered speaker, etc

For details on connecting the input/output terminals, see the Operating Instructions.

3 Connect this unit to your computer via a USB cable.4 Turn on the computer’s power.

Turn on the power of this unit.

For Windows users

The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait a while until the message [Your devices are ready for use] appears.

6Turn on the power of the devices connected to the output terminals (powered speakers, power amplifier,

components, etc.).

When a microphone, DJ player or other external device is con- nected to input terminals, the power of that device also turns on.

8En