Pioneer DJM-2000 Basic Operation, Outputting sound, Adjusting the sound quality, Monitoring sound with headphones

XCrossfader (page 13)

YMASTER (page 13)

ZMaster Level Indicator (page 13)

ABALANCE (page 14)

BMONO, STEREO (page 14)

CBOOTH MONITOR (page 14)

DSTART/STOP (SNAPSHOT) (page 17)

EON/OFF (MIDI) (page 17)

FCH EQ (ISOLATOR, EQ) (page 13)

GCH FADER (, ) (page 14)

HCROSS FADER (, ,) (page 14)

Basic Operation

Outputting sound

1 Press [POWER].

Turn on the power of this unit.

2 Switching the [CD/DIGITAL, PHONO, LINE, USB */*] switch

Select the input sources for the different channels from among the devices connected to this unit.

—[CD/DIGITAL]: Selects the DJ player connected to the [CD] terminals. To select the DJ player connected to the [DIGITAL IN] terminal, set the [CD, DIGITAL] switch on the rear panel to [DIGITAL].

—[PHONO]: Selects the analog player connected to the [PHONO] terminals.

—[LINE]: Selects the cassette deck or CD player connected to the [LINE] terminals.

—[USB */*]: Selects the sound of the computer connected to the [USB] port.

3 Rotate [TRIM].

Adjusts the level of audio signals input in each channel.

The corresponding channel level indicator lights when audio signals are being properly input to that channel.

4 Set the channel fader to the inner position.

Adjusts the level of audio signals output in each channel.

5 Switch the [CROSS FADER ASSIGN (A, THRU, B)] switch.

Switches the output destination of each channel.

—[A]: Assigns to [A] (left) of the crossfader.

—[B]: Assigns to [B] (right) of the crossfader.

—[THRU]: Choose this when you do not want to use the crossfader. (The signals do not pass through the crossfader.)

6 Set the crossfader.

This operation is not necessary when [CROSS FADER ASSIGN (A, THRU, B)] is set to [THRU].

7 Turn the [MASTER] control.

Audio signals are output from the [MASTER1] and [MASTER2] terminals. The master level indicator lights.

Adjusting the sound quality

Turn the [EQ/ISO (HI, MID, LOW) ] controls for the individual channels.

Refer to Specifications on page 29 for the range of sound that can be adjusted by each control.

Switching the [EQ/ISO (HI, MID, LOW)] function.

Switch the [CH EQ (ISOLATOR, EQ)] switch.

—[ISOLATOR]: The isolator function is set. The indicator lights.

—[EQ]: The equalizer function is set.

Monitoring sound with headphones

1Connect headphones to the [PHONES] jack.

2Press [CUE] for the channel to be monitored.

3Switch the [MONO SPLIT, STEREO] switch.

—[MONO SPLIT]: The sound of the channel for which [CUE] is pressed is output from the headphones output’s left channel, while the sound of [MASTER] is output from the right channel.

—[STEREO]: The sound of the channel for which [CUE] is pressed is output in stereo from the headphones.

4Turn the [MIXING] control.

This adjusts the balance of the monitor volume between the sound of the channel for which [CUE] is pressed and the [MASTER] channel sound.

5 Turn the [LEVEL] control for [HEADPHONES].

Sound is output from the headphones in the channel selected by [CUE].

!Monitoring is canceled when [CUE] is pressed again.

!When [LIVE SAMPLER] is turned on, [CUE] button for the TOUCH PANEL EFFECT and [CUE] button for the [LINK] cannot be pressed simultaneously.

English

En 13