Contents
How to read this manual
The names of displays, menus, and buttons in this manual are enclosed in brack- ets. (e.g. [Collection] pane, [File] menu, [f])
Before start |
|
Features | 5 |
What’s in the box | 5 |
Connections |
|
Rear Panel | 6 |
Connecting input terminals | 7 |
Connecting output terminals | 7 |
Connecting to the control panel | 8 |
Connecting a computer | 8 |
About the USB audio driver software | 8 |
About | 10 |
Operations |
|
Control Panel | 12 |
Operating the DJ section | 13 |
Operating the MC section | 14 |
Operating the PA section | 15 |
Additional information |
|
Troubleshooting | 16 |
About the exemption clauses | 16 |
Block Diagram | 17 |
Specifications | 18 |
Mounting on a rack conforming to EIA standards
The screw holes on the left and right of the control panel of this unit match 5U size of any EIA standard
!Secure this unit with screws (not supplied) matching the rack.
!Do not install this unit directly above a power amplifier. Heat radiating from the power amplifier may damage this unit. Also, noise (hum noise, etc.) may be generated.
!When transporting this unit, remove it from the rack. Transporting this unit without removing it from the rack may damage this unit.
!If you transport this unit without removing it from the rack, make sure vibration or shock is not applied to this unit.
4En
