CONNECTIONS (CONNECTING MICROPHONE AND HEADPHONES/CONNECTING THE POWER CORD)CONNECTING MICROPHONE AND HEADPHONES
Microphone

The MIC 1 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.3 mm phone plug or XLR plug.

The MIC 2 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.3 mm phone plugs.

When the connection panel’s MIC SIGNAL switch is set to [CUT], no microphone sounds will be output from the BOOTH monitor output connectors.

When using a microphone, set the operating panel’s MIC switch to [ON] or [TALK OVER], and adjust the LEVEL dial as necessary. When not using a microphone, it is recommended to set the MIC

switch to [OFF] and rotate the LEVEL dial fully counterclockwise to the [- ∞] side.

Microphone 1

(Microphone 1)

MIC

MIC 1

MIC 2

MIC 1

LEVEL

0

MIC 2

Microphone 2LEVEL

0

HI

-12 +6

EQ

LOW

-12 +6

Headphones

The PHONES jack on the upper surface of the operating panel can be used to connect headphones with a Ø6.3 mm stereo phone plug.

HEADPHONES

MONO SPLIT STEREO

MIXING

CUE MASTER

LEVEL

0

PHONES

Headphones

MIC

OFF ON TALK

OVER

CONNECTING THE POWER CORD

Connect the power cord last.

÷After completing all other connections, connect the accessory power cord to the AC inlet on the back of the player, then connect the plug to a standard wall outlet or to the auxiliary power outlet of your amplifier.

÷Use only the supplied power cord.

8