PART NAMES AND FUNCTIONS
5CH-1 equalizer dials (HI/MID/LOW)
HI
Use to adjust
13kHz, +6 dB to
MID
Use to adjust
LOW
Use to adjust
70Hz, +6 dB to
15Monitor SELECT switch
MASTER position
selects MASTER output. (This setting allows output regardless of the setting of the MASTER LEVEL dial.)
EFFECT position
Regardless of the [ON/OFF] setting of the EFFECT switch, the output is the signal selected with CUE, with effects added.
CUE position
selects the channel adjusted with the headphone mixing lever (17).
6 MIC SEND button and indicator
When set to On, the indicator lights, and microphone signals are output at the SEND jacks. This function is disabled when the
7 Session input level dial (SESSION IN)
Use to adjust the session input volume (range of adjustment: 0 dB to
8
When set to On, the indicator lights, and
9 CH-1 EQ ON/OFF switch and indicator
When set to [ON], the indicator lights and
When set to [OFF], the indicator goes out and the equalizer circuit is bypassed.
10 CH-2 input selector switch (CH-1 – PHONO 2/LINE 2 – CD 2)
Use to select input signal from
*When
11
Use to adjust the
12 MASTER LEVEL dial
User to adjust the master output volume level (range of adjustment: 0 dB to
13 Booth monitor level dial
(BOOTH/SESSION OUT)
Use to adjust the volume level of signals at the BOOTH/ SESSION OUT jacks (range of adjustment: 0 dB to
This level can be set independently of the setting of the MASTER LEVEL dial.
16CH-2 equalizer dials (HI/MID/LOW)
HI
Use to adjust
MID
Use to adjust
LOW
Use to adjust
17Headphone mixing lever (CH-1 – CH-2)
This lever does not function when the monitor SELECT switch (15) is set to [MASTER].
When the monitor SELECT switch (15) is set to [EFFECT] or [CUE], moving the lever to the left side produces
18
When set to On, the indicator lights, and
19 CH-2 EQ ON/OFF switch and indicator
When set to [ON], the indicator lights and the
When set to [OFF], the indicator goes out and the equalizer circuit is bypassed.
20 CH-1 FADER START button
When this button is set to On, fader start and back cue can be performed on the
Whether the operation is initiated by operation of the
*For DJ CD players supporting the fader start/back cue function, see page 5, “1. Connecting Input Components”.
14 Headphones level dial (PHONES)
Use to adjust the volume level of the headphones output (range of adjustment: 0 dB to
21CH-1 output On/Off lever (TRANSFORM)
Use to set
The lever’s setting angle can be changed in 45° increments (changing of the angle should be performed by an authorized Pioneer service technician).
8