PART NAMES AND FUNCTIONS
43 CH-1 effect switch and indicator (EFFECT LOCK ON/OFF/ON)
To turn effects [ON], either pull switch forward (switch returns automatically to [OFF] when released) or slide to far side to the [LOCK ON] position. When effects are [ON], the indicator flashes and effects are applied to
49 CH-2 effect mix ratio/depth adjust dial (MIX/DEPTH)
Use to adjust the volume (amount) of effects applied to
44 CH-1 TAP button
Under normal conditions, the automatic BPM counter operates to display the track’s BPM value on the touch panel. Automatic BPM counting may be difficult with some tracks, however. In such cases, or if you wish to deliberately set a different BPM, use the TAP button.
•The BPM value can be changed by rotating the TIME/ SELECT dial while holding the TAP button depressed.
•Tapping the button in time with the beat will cause the function to switch to the manual BPM count mode; the tapped beat will be counted and displayed as the BPM value. Returning to the auto BPM mode is performed from the effect parameter adjust screen (see page 16, “Automatic Mode BPM Counting”) .
45 CH-2 effect bank buttons and indicators (BANK 1, 2, 3)
When one of these buttons is pressed, the indicator lights and the corresponding preset effect is enabled. Each BANK button can be recorded with three effects for
50 CH-2 effect switch and indicator (EFFECT LOCK ON/OFF/ON)
To turn effects [ON], either pull switch forward (switch returns automatically to [OFF] when released) or slide to far side to the [LOCK ON] position. When effects are [ON], the indicator flashes and effects are applied to
51 CH-2 TAP button
Under normal conditions, the automatic BPM counter operates to display the track’s BPM value on the touch panel. Automatic BPM counting may be difficult with some tracks, however. In such cases, or if you wish to deliberately set a different BPM, use the TAP button.
•The BPM value can be changed by rotating the TIME/SELECT dial while holding the TAP button depressed.
•Tapping the button in time with the beat will cause the function to switch to the manual BPM count mode; the tapped beat will be counted and displayed as the BPM value. Returning to the auto BPM mode is performed from the effect parameter adjust screen (see page 16, “Automatic Mode BPM Counting”) .
46CH-2 effect parameter adjust button (FX ADJ.)
Press to display the touch panel’s
47Fader curve display and
button (FADER CURVE/BANK EDIT)
Press to display the fader curve on the touch panel. Holding the button depressed for about one second will cause the touch panel to display the
48 CH-2 effect time adjust/select dial (TIME/SELECT)
Use to adjust the time parameters of effects applied to
11