Pioneer DV-344 Setting digital audio connections to an AV amplifier or decoder, Don’t Know

Setting digital audio connections to an AV amplifier or decoder

The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or external decoder. As there are numerous options available, please refer to the instructions supplied with the component the player is connected to determine what digital audio formats can be decoded. If you have made no digital connections, select [Not Connected].

Audio1 Audio2 Video LanguageGeneral

Setup Navigator	Dolby Digital
Amp Connection	Dolby Digital/DTS
	Dolby Digital/MPEG
Digital Jack	Dolby D/DTS/MPEG
	PCM
	Not Connected

Move ENTER Select SETUP Exit

Settings: Dolby Digital*

Dolby Digital/DTS

Dolby Digital/MPEG

Dolby D/DTS/MPEG

PCM

Not Connected

* Factory setting

Setting compatibility with 96 kHz output

The [96 kHz PCM Audio] screen establishes whether or not the AV component the player is connected to is capable of processing an audio signal with a sampling rate of 96 kHz. This screen only appears if connections have been made to an external AV component as determined in previous screens.

Audio1 Audio2 Video LanguageGeneral

Setup Navigator
Amp Connection
	No
96 kHz PCM Audio	Yes
	Don't Know

Move ENTER Select SETUP Exit

Settings: No*

Select if the connected AV component cannot process an audio signal with a sampling rate of 96 kHz.

Yes

Select if the connected AV component can process an audio signal with a sampling rate of 96 kHz.

Don’t Know

Select if you are uncertain whether the connected AV component can process an audio signal with a sampling rate of 96 kHz.

* Factory setting

Confirming the settings

The [Exit Setup Navigator] is the final screen in the Setup Navigator.

Audio1 Audio2 Video LanguageGeneral

Setup Navigator
		Save Changes
Exit Setup Navigator		Delete Changes
Move		Start Again
		Select		Exit
	ENTER		SETUP

Settings: Save Changes*

Select to have the player make all of the necessary audio, video and language settings automatically.

Delete Changes

Select to exit the Setup Navigator without changing any of the system settings.

Start Again

Select to return to the [OSD Language] screen of the Setup Navigator and do the settings again.

* Factory setting

To exit the Setup screen

When you have completed setting up the player using the Setup Navigator or if you exit the Setup Navigator, the Setup screen General menu appears. Press SETUP to close the Setup screen.

To change other player settings in the Setup screen menus

The procedure for changing the settings in the Setup screen menus is described on page 24.

SETTING UP THE PLA YER

19

En