Pioneer DV-989AVi-G operating instructions Channel Level

Audio Settings menu

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

2Highlight Virtual Surround, then use the Joystick (left/right) to change to ‘2V/

SRS TruSurround’ or ‘Off’, as required.

Audio Settings	1/ 2
Audio DRC	Off
Legato PRO
	Off
Hi-Bit
	On
Virtual Surround	Off
Channel Level	Fix

3Press ENTER to make the setting and exit the Audio Settings screen.

•You can also use the SURROUND button on the remote control to switch Virtual Surround on (2V/SRS TruSurround)/ Off.

•Virtual Surround does not work with CD, MP3, DVD-Audio or SACD discs, or 96kHz Linear PCM soundtracks.

•The Virtual Surround effect is output only through the analog AUDIO OUT (2ch) jacks.

•Make sure that Audio Output Mode is set to 2 Channel (see Audio Output Mode on page 71).

•How good the surround effect is varies with the disc.

06

Channel Level

• Default setting: Fix

This setting allows you to set the level of each channel sent to the 5.1 channel analog outputs.

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

2Highlight Channel Level, then use the Joystick (left/right) to change to ‘Fix’ or ‘Variable’, as required.

Audio Settings	1/ 2
Audio DRC	Off
Legato PRO	Off
Hi-Bit
	On
Virtual Surround
	Off
Channel Level	Fix

•Fix – Channel levels are fixed, but you can set the speaker distances

•Variable – You can specify variable channel levels as well as speaker distances

3If you chose Variable, use the joystick (down) to proceed to the next screen.

Audio Settings	1/ 3
Audio DRC	Off
Legato PRO
	Off
Hi-Bit	On
Virtual Surround
	Off
Channel Level	Variable

4Variable setting only: Set the channel levels for each speaker.

Audio Settings	2/ 3
Channel Level L	0.0 dB
Channel Level C	0.0 dB
Channel Level R
	0.0 dB
Channel Level RS	0.0 dB
Channel Level LS
	0.0 dB
Channel Level SW	0.0 dB

53

En