Installation
Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown.
All installations must comply with the local authorities requirements for the discharge of
exhaust air.
Incorrect installation may affect the safety of this cooker hood.
Installation Requirements
Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas.
The chimney hood must be installed accord- ing to the instructions suppliers below and by qualified and competent personnel to the relevant National Standards.
This cooker hood is designed to be fixed to any vertical surface over a cooking area,and can be used in the extrac- tion (ducted to the outside) or recirculation mode.
The installation work must be undertaken by a qualified and competent person.
The manufacturer disclaims any responsibility for dam- age due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation.
Unpacking
Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton.
The cooker hood is made up of the following compo- nents:
Ref Qty Product Components
11 Canopy complete with: Controls, Light- ing, Fan Assembly, Grease Filter, Charcoal Filter.
81 Recirculation grille
161 Filter Cover
Ref Qty Installation Components
112 Security Wall plugs
11a | 2 | Wall plugs SB 12/10 |
12a | 2 | Security screws |
12c | 4 | Filter cover fixing screws |
12d | 2 | Recirculation grille fixing screws |
Ref Qty Documentation
1Instruction booklet
�
��
���
���
���
�
��
���
5