John Lewis JLBIHD908 Using the cooker hood, Cooker hood controls, Functions, S1 Led

Using the cooker hood

The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. The appliance can be installed to recirculate or extract contaminated air.

Cooker hood controls

The hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 button.

KEY		LED	Functions
L 0/1 Light		Turns lighting on and off.
T1 0/1 Motor	on	First speed.
		When pressed for about 1 second the motor is
		switched off.
	Flashing	24h Changeover
		This is enabled by pressing and holding the button
		for approximately 5 seconds. It allows a suction
		level of 100 m3/h with a noise level of just 28dB(A).
		Can be enabled at any speed, even with the hood
		turned off. To disable, press and hold the button for
		approximately 5 seconds.
T2 Speed	on	Second speed.
	Flashing	Delay (30 minutes)
		Press the button for approximately 2 seconds to
		enable automatic shutdown with a 30 minutes delay.
		Suitable to complete elimination of any residual
		smells. Can be enabled at any speed and is disabled
		by pressing the button briefly.
T3 Speed	on	Third speed.
T4 Speed	Fixed	Max. speed
	Flashing	Intensive speed.
		Suitable for the strongest cooking vapours and
		odours. The function becomes active when the
		button is pushed for about 2 seconds. After 10
		minutes of	functioning it turns off automatically.
		This function can be interrupted by means of
		pressing any of the buttons.
S1 Led	Fixed	Indicates that the Metal grease filters saturation
		alarm has been triggered, and the filters need to be
		washed. The alarm is triggered after 100 working
		hours. (Reset; check the Maintenance-paragraph)
	Flashing	Indicates that the activated charcoal odour filter
		saturation alarm has been triggered, and the filter
		has to be replaced; the metal grease filters must also
		be washed. The activated charcoal odour filter is
		triggered after 200 working hours. (Activation and
		Reset; check the Maintenance-paragraph)

�

��

��

��

��

��

9