Reset the alarm signal
•Stop the motor and switch off the lights.
•Press button T3 for at least 3 seconds, until the LEDs start to flash.
This appliance can be a possible fire hazard if the grease and charcoal filters are not cleaned and replaced as recommended.
Changing the halogen spot lamp
•Remove the lamp from the holder by pulling the lamp downwards.
•Replace the lamp with a new one of the same type, making sure that you insert the two pins properly into the housing on the lamp holder.
•Replace the light cover, fixing it in place with the screws removed as above.
Replacement filters and light bulbs can be ob- tained from your local Service Force Centre.
13