Pioneer DV-989AVi-G Hdmi output with DVD-Audio sources, Channel compatible*1

Additional information 09

HDMI output with DVD-Audio sources

DVD-Audio sources often have high sample rates (such as 192kHz/24bit/2 channel or 96kHz/ 24bit/6 channel) and the way they are output from the HDMI terminal will depend on the specification of the connected component.

	Component specification
Component/output	HDMI Ver. 1.1 (DVD-Audio and
	DVD-Audio) or only HDMI Ver. 1.0*1
	5.1 channel compatible)*1
	HDMI Ver. 1.1 (DVD-Audio and
	2 channel compatible)*1
	HDMI Ver. 1.1 (Incompatible with

Example	Format		Speakers Audio
Component	2 ch	5.1 ch	Output Mode (p.71)
VSX-AX4AVi-G	2 ch	5.1 ch*2*3	Set to '5.1 Channel'
VSX-AX2AV-G
PDP-506HDG	2 ch	Left/Right or	Set to '2 Channel'
		2 ch downmix*4
PDP-505HDG	No	No
	sound*4	sound*5

*1 This unit checks the specification of the connected component (such sample rate / multi- channel limitations and CPPM compatibility) and outputs the signal accordingly. Note that ‘DVD-Audio compatible’ indicates compatibility with CPPM (Content Protection for Pre- recorded Media).

*2 If the Speakers Audio Output Mode (page 71) is set to 2 channel, multichannel sources will be downmixed to stereo. (In cases where the source is downmix-prohibited, it is output as 5.1 channel audio.)

*3 If the video output resolution is VGA, 480i, 576i, 480p or 576p, audio output may be limited to 2 channel (depending to the connected component).

*4 If the Speakers Audio Output Mode (page 71) is set to 2 channel, multichannel sources will be downmixed to stereo. (In cases where the source is downmix-prohibited, only the front left/right channels are output.)

*5 If CPPM shows in the front panel display, it means it is not possible to output CPPM copy- controlled DVD-Audio sources from the HDMI connection. Discs with no CPPM protection are limited to 2 channel output.

81

En