Pioneer DVD-U02 user service Disc Removal Method, Forced Ejection Method in Case of Emergency

DISC OPERATION

DISC REMOVAL METHOD

¦Confirm that the BUSY indicator of the drive is not lit, and then press the Eject button (0).

¦Remove the disc after it has been ejected.

FORCED EJECTION METHOD IN CASE OF EMERGENCY

In the following cases, the disc can be removed using the forced ejection hole.

¦In case of drive trouble, when the disc can not be ejected with the Eject button or by a software command.

¦When the disc is to be removed while the power is switched off.

Confirm that the power supply of the computer is switched off and the disc loading is stopped. It takes approx. 30 seconds to stop loading a disc after switching off the power supply. While this operation, do not execute the forced ejection.

Fig. 8

¦Use an accessory pin for emergency ejection, insert it straight into the hole for forced ejection, and push strongly.

¦As the disc will be ejected approx. 5-10 mm (3/16–3/8 in.) from the disc loading slot, pull it out by fingers.

Always use the pin provided (Do not use other objects).

Do not execute the forced ejection while loading a disc, an injury or a disc damage will be caused.

Do not place anything within 12 cm (4.72 in.) in front of the unit as this may obstruct the disc ejection operation of the unit.

13

<DRC1083> En