Pioneer DVR-A05 Region Code Information, Installation, Positioning the Drive, Connections

DVR-A05/ DVR-105 Operating Instructions

4.3Region Code Information

The maximum number of times the Region Code may be changed is five (5), including the initial setting. The fifth change becomes PERMANENT.

Note: Region Codes are part of the DVD Standard, however, Region Codes on DVD discs are optional. DVD discs with no specified Region Code may be played on any player.

5.0INSTALLATION

The following sections provide step-by-step instructions to install the drive.

5.1Positioning the Drive

The DVR-A05/105 tray is designed with disc-clamps so that the drive can be installed horizontally or vertically. Review all instructions prior to installing the drive.

1.Turn OFF the computer and disconnect the power cord.

2.Remove the bezel or front cover from the computer.

3.Remove the drive-bay cover (5.25” slot shield) from the PC’ s front panel.

4.Attach the slide rails to the drive.

(slide rails may be purchased from a computer retailer)

5.Insert the drive in to the open bay/slot.

If the computer requires that the drive be fixed in to place, refer to the PC’s operating instructions. When using screws, select screws shorter than 5mm (3/16”) in length. Longer screws may damage the drive.

Note: When the mounting screws are loose, vibrations from a spinning disc may cause a ripping sound.

5.2Connections

The computer provides power for the drive rather than an external power source. Do not use any other power supply for this drive. The computer needs to be turned OFF during this procedure.

-8 -