Pioneer DVR-450H-S manual Stopping a timer recording, Timer recording FAQ, Select ‘Yes’ to confirm

05Recording

	ENTER
5	Select ‘Store Programme’.

HOME

MENU

6 Press to exit the Timer Recording screen.

Stopping a timer recording

	STOPREC
1	Press during a timer recording.
	ENTER
2	Select ‘Yes’ to confirm.

Preventing use of the recorder before a timer recording (child lock)

You can make all the front panel and remote control buttons inoperative using the child lock feature. This is useful when you set a timer recording and want to make sure that the timer settings are not changed before recording has finished.

STANDBY/ON

1 If the recorder is on, switch it into standby.

2 [Front panel] Press and hold for three seconds to lock the controls.

The front panel display briefly shows LOCKED. If any buttons are pressed on the remote or front panel, LOCKED is briefly displayed again.

•To unlock the recorder, press and hold

(Stop) on the front panel (while the recorder is stopped) for three seconds until the display shows UNLOCKED.

•Even if you make Child Lock settings, this unit can still be controlled by the remote of a connected plasma television. If you do not want this unit to be able to be controlled by another component when you have set a Child Lock, turn this unit’s HDMI Control to OFF (page 115).

46

Timer recording FAQ

Frequently Asked Questions

•Even though the timer is set, the recorder doesn’t start recording!

Check that the disc loaded or HDD is recordable, not locked (see Lock Disc on page 100), and that there are fewer than 99/999 titles already on the DVD/HDD.

•The recorder won’t let me enter a timer programme! Why not?

You can’t enter a timer programme if the clock isn’t set.

•What happens when two or more timer programmes overlap?

Basically, the programme with the earlier recording start time has priority. However, the recorder will start recording the programme with the later start time after the earlier programme is finished. If schedule to record two programmes have the same times (but different channels, for example), then only one of the two programmes will be recorded. In this event you should cancel the scheduled recording of the lesser important programme. If one of the overlapping programmes is a regular timer programme, you may choose ‘Cancel Once’ in order to avoid having it overlap with a separately scheduled programme (see Skipping a regular timer programme on page 45).

En