Pioneer DVR-450H-S manual Connections Connecting a USB device, Jpeg file storage devices

02

24

Connections

Connecting a USB device

(DVR-650H-S/DVR-550H-S only)

Using the USB ports on the front of the recorder you can connect USB devices such as digital cameras, printers, keyboards and PCs. Please also see the instructions that came with the device you want to connect before using.

DVR-650H-S/DVR-550H-S

	USB	USB
	(Type B)	(Type A)
USB		USB

PictBridge-compatible	Digital Camera
Printer
PC	Keyboard

Important

•Some USB devices may not work with this recorder.

•When connecting a PC to this unit, make sure the power is turned off on both the PC and this unit when you connect them via USB.

•We recommend connecting USB devices when this recorder is switched off (in standby).

JPEG file storage devices

•Digital still camera

•Memory card reader (any type of memory card)

•USB memory

The Mass Storage Class (MSC) device should be FAT-compatible. Note that if the device is partitioned, this recorder may not recognize it.

The Picture Transfer Protocol (PTP) can be used to transfer up to maximum 4000 files.

WMA/MP3 file storage devices

•Memory card reader (any type of memory card)

•USB memory

•PC (Use Connect PC function)

The Mass Storage Class (MSC) device should be FAT-compatible. Note that if the device is partitioned, this recorder may not recognize it.

Note that although multi-slot card readers can be used, the recorder will only recognize the first card inserted. To read another card, remove all the cards and insert the card to be read again.

Using a USB hub

•Use a hub compatible with USB 1.1 and/ or 2.0.

•Use an independently powered hub (bus powered hubs may not work reliably).

•In the event of unreliable operation with the hub, we recommend plugging the device directly into the recorder’s USB port.

•Operation may become unreliable if too many devices are connected to the hub. In this case, try unplugging some devices.

•If the power delivered through a hub is insufficient for the devices connected, communication can become unreliable. In this case, disconnect one or more devices then perform a USB restart. (See Restart USB Device on page 116.)

Using a USB printer

• Use a PictBridge-compatible printer.

Using a USB keyboard

•Do not use a PS/2 keyboard connected using a PS/2-USB adapter.

En