Getting started
33
En
04
2 Highlight ‘Postal Code’.
3 Enter your postal
code.
The system uses your postal code to identify
which TV listings data is correct for the area
in which you live, so it is important that you
enter it correctly.
4 If you are using an external receiver
(such as a satellite receiver) with the
supplied G-LINK cable, complete this
step, otherwise jump to step 5 below.
• See
Connecting to a cable box or satellite
receiver
on page 17 for more on using the
supplied G-LINK cable.
• Select
External Receiver 1
,
2
or
3
, then
press
ENTER
. (If you have just one
external receiver, use
External Receiver
1
. You can add further receivers in
2
and
3
if you need to.)
After pressing
ENTER
:
• Select your reception method
(
Terrestrial
,
Cable
or
Satellite
).
• Select your provider (if applicable).
• Select the brand of your external
receiver.
• Identify which input your external
receiver is connected to.
After completing these steps the recorder
will try and communicate with your external
receiver and change the channel via the G-
LINK cable. If the channel was successfully
changed, select
Yes
to confirm.
If the channel did not change, select
No
. The
GUIDE Plus+ system will try other codes
assigned to your external receiver. If none of
the codes changes the channel
successfully, tune your external receiver to
the host channel for your country (refer to
step
5
below) and leave it on overnight. The
ENTER
ENTER
DVR550HXS_WV_EN.book 33 ページ 2007年3月30日 金曜日 午前10時48分