Using the GUIDE Plus+® electronic programme guide
49
En
05
•I used the One-Button-Record feature (red
Action button) to set a recording, but I
recorded the wrong channel.
If the channel to be recorded is received
via the external receiver first make sure
that the external receiver was left
switched on. Next, in the Editor Area,
make sure that the channel to be
recorded is correctly set: Access the
Editor Area. Check the source and
programme number of the channel that
you wanted to record. Change the
source and preset numbers if incorrect.
If you are recording from the recorder’s
internal tuner (the
A.TV
or
D.TV
setting), make sure that the programme
number is the same as the preset
number set on this recorder. If they are
different, go to the Editor Area and
change the programme number to
match the recorder’s preset number.
• The TV listings information doesn’t
update.
The latest TV listings information is
automatically downloaded by the
recorder overnight. This only happens if
the recorder is in standby; if the recorder
is left on, it will not download. When not
using the recorder, please switch it into
standby.
Data downloads can take several hours.
The front panel display shows
EPG
when
downloading. If you switch the recorder
on while
EPG
is displayed, the download
will be cancelled.
• The GUIDE Plus+ system is not
supported in my area, but when I switch
the recorder into standby, after a while the
front panel display shows
EPG
. Can I stop
this from happening?
If the GUIDE Plus+ system is not
supported in your area, please do not set
the postal code in the GUIDE Plus+
setup (see
Setting up the GUIDE Plus+®
system
on page 32). When the GUIDE
Plus+ service starts in your area, please
set the postal code again.
• The automatic Host Channel search
failed or the GUIDE Plus+ system
identified the wrong Host Channel for my
region.
You can identify your Host Channel
manually. See
Manual Host Channel
setup
on page 47 for how to do this.
DVR550HXS_WV_EN.book 49 ページ 2007年3月30日 金曜日 午前10時48分