INTERFACE
FRONT VIEW

PHONES

DISC READ/WRITE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

12

3

4

5

6 7

English

1Disc Loading Tray

Open the loading tray by pressing the eject button, then place a CD or DVD disc into the slit with the label facing up.

Press the eject button or push the front part of tray to load the tray with the disc.

2Headphone Jack (PHONES)

Stereo mini jack for head-phone.

Set “Volume Control Knob” minimum position before inserting headphone jack.

The audio output of rear panel is active even when a jack is inserted into the headphone plug.

3Volume Control Knob

This is the volume control knob for adjusting sound level on the headphone.

When the knob is turned to the right, the headphone volume goes up, when turned to the left, the volume goes down.

4Ventilation Holes

Do not block this part.

5DISC Indicator

Lights when a disc has been inserted.

 

When tray is opened or closed

Blinks green

Read only disc

Lights green

Recordable disc

Lights orange

Unsupported disc

Blinks orange

6READ/WRITE Indicator

Operation status is indicated as follows.

During reading

Lights green

During writing

Lights orange

When an error occurs

Blinks orange

• Abnormal rise of internal temp

• Blinks 1x and then repeats

• Lens or disc dirty

• Blinks 2x and then repeats

• Other error

• Blinks 3x and then repeats

7Eject Button (0)

To unload /load the disc, press the button.

8Forced Ejection Hole

Insert a stiff rod into the hole and push to eject the tray when the tray doesn’t unload by pressing the Eject button. In the normal operation, the eject button should be used to unload the tray. Make sure the power of the drive is turned off and wait more than one minute till the disc rotation is stopped when access the eject hole.

23

En