EFFECTS (Beat Effects)

EFFECTS

Beat Effects

1. DELAY effect

Adds delay sound to the original sound.

[BPM mode]

A delay sound is added to the original sound at the value set with the TIME dial.

÷The DEPTH dial can be used to adjust the feedback level. Feedback means to input the delay sound back into the delay input. This control allows the amount of the feedback to be adjusted (near the [MAX] setting, the sound level rises).

÷The CHARACTER dial can be used to adjust the amount of filter applied to the feedback sound.

÷The MIX dial can be used to adjust the levels of the original and delay sounds.

TIME

 

level

 

Sound

DEPTH

 

Original

Time

Feedback

sound

 

Delay sound

 

Delay block

[RHYTHM mode]

A delay sound set with the TAP button (TAP delay sound) is added to the original sound (Max 8-TAP).

÷The DEPTH dial can be used to adjust the TAP delay level (near the [MAX] setting the sound volume will rise).

÷The CHARACTER dial can be used to adjust the amount of filter applied to the TAP delay sound.

÷The MIX dial can be used to adjust the levels of the original and TAP delay sounds.

level

 

 

 

Sound

 

 

DEPTH

 

 

 

Original

Delay

Delay Delay

Time

Delay

sound

sound

sound sound

sound

TAP 1 delay

block

TAP 8 delay

block

2. ECHO effect

Adds delay sound to the original sound.

[BPM mode]

A delay sound is added to the original sound at the value set with the TIME dial.

[RHYTHM mode]

Adds TAP delay sound to the original sound (Max 8-TAP).

Difference from the DELAY effect:

÷Even if the BEAT EFFECTS lever switch is moved from [ON] to [OFF], the feedback sound or TAP delay sound will continue.

÷In the BPM mode, if the DEPTH dial is set to [MAX] and the BEAT EFFECTS lever switch is moved from [ON] to [OFF], a hold-delay effect will be produced without attenuating the feedback sound (near the [MAX] setting, the sound level rises).

In the RHYTHM mode, when the switch is turned [OFF] the effect will end with the final TAP delay sound for the original sound.

BPM mode

Echo block

RHYTHM mode

TAP 1 echo

block

TAP 8 echo

block

3. PITCH ECHO effect

Changes the pitch of the delay sound, and applies the effect to the original sound.

In the same way as for the ECHO effect, the effect sound is maintained even if the BEAT EFFECTS lever switch is set from [ON] to

[OFF].

[BPM mode]

Changes the pitch of the delay sound set with the TIME dial, and applies the effect to the original sound.

÷The DEPTH dial can be used to adjust the feedback level.

÷The CHARACTER dial can be used to adjust the pitch of the delay sound.

÷The MIX dial can be used to adjust the levels of the original and pitch echo sounds.

Pitch echo

block

[RHYTHM mode]

Changes the pitch of the TAP delay sound, and applies the effect to the original sound. Although a maximum of 8-TAPs can be recorded, only 4-TAPs can be used for effect.

÷The DEPTH dial can be used to adjust the TAP delay level (near the [MAX] setting the sound volume will rise somewhat).

÷The CHARACTER dial can be used to adjust the pitch of the TAP delay sound.

÷The MIX dial can be used to adjust the levels of the original and pitch echo sounds.

TAP 1 pitch echo block.

TAP 2 pitch echo block.

TAP 3 pitch echo block.

TAP 4 pitch echo block.

4. TRANS effect

Cuts the original sound intermittently.

[BPM mode]

Cuts the sound at the interval set by the TIME dial (cuts latter half of the interval).

÷The DEPTH dial can be used to adjust the amount that is cut.

Time

Cut

Time

Cut

Time

÷The CHARACTER dial can be used to adjust the phase difference between L and R channels.

Time

Time

Time

Time

÷The MIX dial can be used to adjust the levels of the original and trans sounds.

10