BEFORE USE (CONNECTIONS)

Basic Connections

Before making or changing the connections, switch off the power switch and disconnect the power cord from the AC outlet.

1. Connecting the SEND/RETURN Terminals on the

 

÷ If the DJ mixer supports digital link, it can be connected

DJ Mixer (on DJ mixer provided with SEND and

 

 

 

to the EFX LINK connector using the provided digital link

RETURN terminals)

 

 

 

cable to eliminate the need for connection by an analog

÷ Make connections using cables with 1/4-inch/6.3 mm in

 

 

 

6.3mm phone plug cable (audio signals transmitted over

diameter phone plugs.

 

 

 

the digital link cable are in digital format). Also note that

÷ Set the DJ mixer so that the SEND and RETURN

 

 

 

extraneous noise may result if both analog and digital

terminals can be used.

 

 

 

link cables are connected simultaneously.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

÷ Set the IN & OUT LEVEL switch on the Effector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the [–10 dB] position.

 

 

 

 

 

 

 

 

 

 

Effector EFX-1000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stereo Amplifier

FOOT SW

INPUT

OUTPUT

EFX LINK

Accessory digital

Foot switchlink cable (pedal switch)

: Signal flow

MASTER OUT

DJ Mixer

SEND

 

 

 

 

 

SEND 1

 

–26

+6

 

 

 

RETURN

 

 

 

RETURN 1

DJ CD Player

CH-1

CH-2

DJ CD Player

2.Connecting a DJ Mixer and an Audio Amplifier (on DJ mixer not provided with SEND and

RETURN terminals)

÷Connect using cables with phone plugs (1/4-inch/6.3 mm in diameter) or RCA pin plugs.

÷When making connections, do not connect both RCA pin plug cables and phones plug cables for the same connection function (use either one or the other, not both). Also, if you wish to use analog connections, do not also make connections to the digital connectors (digital signals are given priority when connected).

For digital connections, use RCA pin-plug coaxial cables. Set the OUTPUT fs SELECT switch in accordance with the connected component.

8