Pioneer FH-P4400 Subwoofer Setting Adjustment 80Hz, Front Image Enhancer Function FIE

Audio Adjustment

Subwoofer Setting Adjustment (80Hz)

When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level of Subwoofer.

1.Press the AUDIO button and select the Subwoofer setting mode (80Hz) in the Audio Menu.

2.Select the frequency to 50 Hz, 80 Hz or 125 Hz with the 2/3 buttons.

3.Increase or decrease the output level with the 5/∞ buttons.

The display shows “+6” – “–6”.

EQUALIZER CURVE	TRK	A
		SUB-W

EQUALIZER CURVE	TRK	A
		SUB-W

Note:

•You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the Subwoofer ON/OFF mode.

Front Image Enhancer Function (FIE)

The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their out- put to low-range frequencies.

Precaution:

•When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.

1.Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio Menu.

2.Switch the F.I.E. function

ON/OFF with the 5/∞ but- tons.

“FIE”

Note:

•After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced.

•Switch the F.I.E. function OFF when using a 2-speaker system.

41