Installation

<ENGLISH>

CAUTION

• Do not install in:

—Places where it could injure the driver or pas- sengers if the vehicle stops suddenly.

—Places where it may interfere with the driver,

such as on the floor in front of the driver’s seat.

•Make sure that wires are not caught in the sliding mechanism of the seats, resulting in a short-cir- cuit.

•Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Protect all cables and important equipment such as fuel lines, brake lines and electrical wiring from damage.

•Install tapping screws in such a way that the screw tip does not touch any wire. This is impor- tant to prevent wires from being cut by vibration of the car, which can result in fire.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

•To ensure proper installation, use the supplied parts in the manner specified. If any parts other than the supplied ones are used, they may damage internal parts of the amplifier, or they may become loose causing the amplifier to shut down.

•Never replace the fuse with one of greater value or rating than the original fuse. Use of an improp- er fuse could result in overheating and smoke and could cause damage to the product and injury including burns.

CAUTION:

To prevent malfunction and/or injury

•To ensure proper heat dissipation of the amplifier, be sure of the following during installation.

—Allow adequate space above the amplifier for proper ventilation.

—Do not cover the amplifier with a floor mat or carpet.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

•Do not install the amplifier on unstable places such as the spare tire board.

•The best location for installation differs with the car model and installation location. Secure the amplifier at a sufficiently rigid location.

•Make temporary connections first and check that the amplifier and the system operate properly.

•After installing the amplifier, confirm that the spare tire, jack and tools can be easily removed.

Example of installation on the floor mat or on the chassis

1.Place the amplifier where it is to be

installed. Insert the supplied tapping screws (4 ⋅ 18 mm) into the screw holes. Push on the screws with a screwdriver so they make marks where the installation holes are to be located.

2.Drill 2.5 mm (1/8 inch) diameter holes at the point marked, and install the amplifier, either on the carpet or directly to the chassis.

Tapping-screws

(4 ⋅ 18 mm)

Floor mat

or chassis

Drill a 2.5 mm (1/8 inch) diameter hole

Page 9 Page 11
Page 10
Image 10
Pioneer GM-6200F owner manual English
Page 9 Page 11

GM-6200F specifications

The Pioneer GM-6200F is a powerful and versatile 4-channel amplifier designed to enhance the audio experience in vehicles. Known for its robust performance and advanced technologies, this model is a favorite among car audio enthusiasts who seek to upgrade their sound systems.

One of the standout features of the GM-6200F is its impressive power output. With a maximum power of 600 watts, it can deliver 75 watts per channel at 4 ohms in stereo mode, making it suitable for driving multiple sets of speakers or subwoofers. This capability ensures that audio playback is loud, clear, and dynamic, regardless of the genre of music being enjoyed.

The amplifier is built with Pioneer’s innovative Class D technology, which significantly improves efficiency and reduces heat generation. This allows the GM-6200F to produce high-quality sound while maintaining a compact and lightweight design. The reduced size also facilitates easier installation in various vehicle setups without compromising on performance.

Another notable characteristic of the GM-6200F is its flexible functionality. It includes high-pass and low-pass filters, allowing users to customize their audio output according to their preferences. The high-pass filter can eliminate low-frequency sounds from the speakers to enhance clarity, while the low-pass filter enables smooth bass response, making it ideal for subwoofer integration.

The design of the GM-6200F is not only about performance; it also incorporates advanced protection circuitry. This ensures that the amplifier remains safe from overheating, short circuits, and overcurrent situations. Such protections contribute to system longevity and reliable operation, giving users peace of mind during extended use.

Installation ease is further enhanced by the inclusion of RCA input and speaker level inputs, making it compatible with a wide range of head units, from basic models to more advanced systems. The amplifier also features a durable and stylish aluminum chassis that not only dissipates heat effectively but also provides a sleek look to match modern car interiors.

In summary, the Pioneer GM-6200F delivers high power, state-of-the-art Class D technology, flexible audio control options, and robust protection features. This combination makes it an excellent choice for anyone looking to elevate their car audio system, balancing power, efficiency, and sound quality seamlessly. Whether you are a casual listener or an audiophile, the GM-6200F offers the performance you need to enjoy your favorite tracks in stunning detail.
Top Page Image Contents