Pioneer GM-6200F owner manual Connection Diagram

Connection Diagram

	Fuse (30 A)
Grommet		Special red battery wire [RD-223] (sold separately)
		After making all other connections at the amplifier,
		connect the battery wire terminal of the amplifier to
		the positive (+) terminal of the battery.
	Fuse (30 A)
		Ground wire (black) [RD-223] (sold separately)
		Connect to metal body or chassis.

Connecting wire with RCA pin plugs (sold separately).

External Output

If only one input plug is used, do not connect anything to RCA input jack B.

RCA input

Car stereo with

RCA output jacks

Amplifier with

RCA input jacks

Speaker input terminal

See the “Using the Speaker Input” section.

Front side

RCA input jack B

Back side

Fuse (25 A) ⋅ 2

Input Select Switch

For two-channel input, slide this switch to the left. For four-channel input, slide this switch to the right.

RCA output jack

RCA input jack A

Connecting wire with RCA pin plugs (sold separately).

Speaker output terminal See the “Connecting the Speakers and Input Wires” section for speaker connection instructions.

System remote control wire (sold separately)

Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control ter- minal, connect the male terminal to the power terminal through the ignition switch.