22Installation

3

Installation

NOTE

•Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.

•When the HDMI connection with HDCP is not verifi ed, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.

•If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m and use a high speed HDMI cable (version 1.3).

•If a connected HDMI device does not accept the audio output of the player, the HDMI

device’s audio sound may be distorted or may not output.

•When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 23.)

•Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 34).

•When you connect a HDMI or DVI compatible device make sure of the following:

-Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720x576p (480p), 1280x720p, 1920x1080i or 1920x1080p video input.

•Not all HDCP-compatible HDMI or DVI devices will work with this player.

-The picture will not be displayed properly with non-HDCP device.

-This player does not playback and TV screen is changed to black screen.

Component Video Connection

Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using Y Pb Pr cables. You can hear the sound the through the system’s speaker.

Component Connection

PlayerPlayer

PR

VIDEO

L

PB

AUX

R Y

COMPONENT

INPUT OUTPUT

Green

Blue

Red

TV

NOTE

When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 23.)