Installation

27

Checking the information of connected Bluetooth device

This function is operated after pairing. You can check the Bluetooth information.

Press DISPLAY repeatedly.

Bluetooth information is changed as follows. Local Bluetooth Device Address t Device

Name t None t ...

NOTE

•This units dose not be supported the Mono Headset Profi le (Hands Free Profi le).

•The sound may be interrupted when the connection interfered by the other electronic wave.

•You cannot control the Bluetooth device with this unit.

•Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported.

•Although the distance between your Bluetooth

and the set is less than 10 m, there are obstacles between both, your Bluetooth device cannot be connected.

•Depending on the type of the device, you may not be able to use the Bluetooth function.

•When not connected the Bluetooth, “BT READY” appears on the display window.

•The Electrical malfunction due to devices using same frequency such as Medical equipment, Microwaves or wireless LAN devices, the connection will be disconnected.

•When someone stands and interrupts communication between Bluetooth device and the player, the connection will be disconnected.

•If the gotten away of the distance between Bluetooth and the unit, the sound quality is lower

and lower the connection will disconnect when the space between the Bluetooth and the unit gets out of the operating range of Bluetooth.

•The device with Bluetooth wireless technology is disconnected, if you turn off the main unit or put the device away from the main unit more than 10 m.

3

Installation