Section

03 Operating this unit

1

Press M.C. to display the setting mode.

Bluetooth Telephone

 

2

Select a file.

This function is available only for MVH-

 

The following operations are available. The operat-

P8200BT.

 

ing method is the same as that for the basic op-

For details on basic operations after connect-

 

erations. Refer to Basic Operations on page 24.

 

ing to a cellular phone, refer to Using Blue-

!

Selecting a folder

tooth telephone on page 13.

!

Selecting a file

!

Searching every 10 files

! PIN code is set to 0000 as the default. You

Pause (pause)

can change this code. Refer to PIN Code

(PIN code input) on the next page.

Random (random play)

!Refer to Random (random play) on page 22.

Play Mode (repeat play)

!Refer to Play Mode (repeat play) on the previous page.

Capture (capturing an image in JPEG files)

!Refer to Capture (capturing an image in JPEG files) on the previous page.

Rotate (picture rotation)

!Refer to Rotate (picture rotation) on the previous page.

Wide Mode (switching the wide mode)

!Refer to Wide Mode (switching the wide mode) on the previous page.

Time Per Slide (slideshow interval time setting)

!Refer to Time Per Slide (slideshow interval time setting) on the previous page.

Note

When the USB or SD source is selected, this unit cannot view still images on USB/SD as a slideshow.

Connection menu operation

Important

Be sure to park your vehicle in a safe place and apply the parking brake when performing this op- eration.

1 Display the phone menu.

Refer to Basic menu operations on page 12.

2 Use M.C. to select Connection.

Turn to change the menu option. Press to se- lect.

3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function.

Device List (connecting or disconnecting a cellular phone from the device list)

1Press M.C. to display the setting mode.

2Turn M.C. to select the name of a device you want to connect.

3Press and hold M.C. to switch the BD address and device name.

4Press M.C. to connect the selected cellular phone.

While connecting, the circular indicator flashes. To complete the connection, check the device name (MVH-P8200BT) and enter the link code on your cellular phone. If the connection is estab- lished, a circular indicator appears next to the de- vice name.

Delete Device (deleting a cellular phone from the device list)

26 En