Pioneer PDA-5002 manual Contents, Before Proceeding

English

Before Proceeding

Contents
Safety Precautions	i
Before Proceeding	2
How to Use This Manual	2
Checking Supplied Accessories	3
Part Names and Functions	4
Connection Panel	4
Installation and Connections	6
Installing the Video Card	6
Input Connectors on the Plasma Display with
Video Card	7
Connection to INPUT1 and INPUT2	7
Connection to INPUT3	10
Connection to INPUT4	10
Connection to INPUT5	11
About DTV set Top Box Connection	11
Audio Connections	12
How to Route Cables	13
Setting Up the System	14
Setup after Connection	14
Operations	16
Selecting an Input Source	16
Screen Size Selection	18
Partial Image Enlargement (POINT ZOOM)	19
Automatic Power OFF	20
Display Panel Adjustments	21
Adjusting the Picture Quality	21
Adjusting the Image Position and Clock
(Automatic Adjustment)	22
Manual Adjustment of Screen Position and
Clock	22
Other Operations	24
Rewriting the Input Display (INPUT LABEL)	24
Changing the Color Temperature
(COLOR TEMP)	25
Reducing Video Noise (DIGITAL NR)	25
Setting the PureCinema Mode	26
Setting the Regional TV System Format	26
Viewing a Fast Moving Picture
(3D Y/C MODE)	27
Viewing in a Bright Location
(HIGH CONTRAST)	28
AUTO FUNCTION	29
Audio Output (AUDIO OUT)	30
Additional Information	31
Specifications	31
Supplement 1	32
Supplement 2	32
Supplement 3	33
Explanation of Terms	33

2

Before Proceeding

How to Use This Manual

This manual has been written to allow easy understanding of setup and operating procedures when the video card PDA-5002 is installed in the plasma display.

Remove the video card from its packaging and confirm that all accessory parts are present. While installing and setting up the video card, consult the section “Part Names and Functions” on page 4 of this manual and in the plasma display’s Operating Instructions to familiarize yourself with the parts of the respective devices. Since this manual makes frequent reference to the names of operating buttons on the plasma display, use the display’s Operating Instructions to familiarize yourself with the controls on the display and the remote control unit.

The section “Installation and Connections” on page 6 includes information necessary for installing the video card on the plasma display, together with instructions regarding connections to various other components.

The section “Setting Up the System” starting on page 14 covers the necessary on-screen menu settings to establish correct linkage between the plasma display and connected components. Depending on the connections made, this section may or not be necessary.

The remainder of the sections in this manual is dedicated to the basic operations associated with selecting a source component up to the more complex operations associated with adjusting the plasma display picture to match the requirements of specific components and personal preferences.

About operations in this manual

Operations in this manual are outlined in step by step numbered procedures. Most of the procedures are written in reference to the remote control unit unless the button or control is only present on the main unit. However, if a button or control on the main unit has the same or similar name as that on the remote control unit, that button can be used when performing operations.

The following example is an actual operation that shows how one might set the horizontal and vertical positions of the screen. The screens shown at each step are provided as a visual guide to confirm that the procedure is proceeding as it should. Please familiarize yourself with this process before continuing on with the rest of this manual.

Note

The screen displays depicted in this manual represent typical display examples.

The actual items and contents seen in screen displays may vary depending on input source and specific settings.

En