English
Thank you for buying this Pioneer product.
Please read through these operating instructions before using your speaker system so you will know how to make the most of its performance. After you have finished reading the instructions, put them away in a safe place for future reference.
WARNING:
Handling the power cord on this product or cords associated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
CAUTION
This product is designed exclusively for use with the Pioneer Plasma Display. For more information on compatibility, please consult with your nearest Pioneer authorized dealer or service center.
BEFORE USE
÷The nominal impedance of this speaker system is 8 ohms.
÷In order to prevent damage to the speaker system resulting from input overload, please observe the following precautions:
÷Do not supply power to the speaker system in excess of the maximum permissable input. This can result in damage or a possible fire hazard.
÷When connecting or disconnecting
÷When using a graphic equalizer to emphasize loud sounds of a high frequency range, do not use excessive amplifier volume.
÷Do not force a
÷Please handle the speakers with sufficient care, as the grille net and the cabinet can become damaged or broken when they are subjected to strong external impacts.
÷Placing a CRT computer screen or CRT monitor near to the speakers may result in interference or color distortion. If this happens, distance the monitor from the speakers.
Installation
÷Consult your dealer if you encounter any difficulties with this installation.
÷Pioneer is not liable for any damage resulting from improper installation, improper use, modification, or natural disasters.
CHECKING THE ACCESSORIES
7Speaker Cable ⋅ 2
7Speakers Mounting Screw (M5 ⋅ 10 mm: Black) ⋅ 16
7Speaker Mounting Bracket
For
For
For
For
7Padding Strip ⋅ 2
(For Flush mounting)
When speakers are mounted Flush, they are affixed to the side of the speaker as a buffer.
7Operating Instructions ⋅ 1
There are two ways to mount these speakers, either Air mount or Flush mount.
7Air mount
There is a gap of air of about 15 mm between the speakers
and the display.
Speakers
7Flush mount
The speakers are direct against the display.
Speakers
CAUTION:
÷Do not place force on the speakers’ front panel grille net, or stick your finger or other object into the front of the speaker, since you may damage the grille net or speaker unit itself.
÷Do not use these speakers with anything other than the Plasma Display. Doing so may result in damage or fire.
2
