Pioneer PDP-S63 manual Connect the supplied the speaker, cables to the speaker, English

				English
4. Connect the supplied the speaker		5. Connect the other end of the speaker
cables to the speaker.		cables to the rear of flat screen TV.
• Connect the cables correctly with respect to the polarity		• Connect the cables correctly with respect to the polarity
of the speaker terminals, that is,  cable (Gray) to 		of the flat screen TV speaker terminals, that is,  cable
terminals (Red) and  cable (Black) to  terminals		(Gray) to  terminals (Red) and  cable (Black) to 
(Black).		terminals (Black).
�����	����	����	�����	����

English

������ ���� ����������������

��� ����� ���

���������������� ���������������� �������������

���������������������������������������������������������������������

NOTE:

• Press the lever and insert the end of the cable.

• When you release the lever, it clamps onto the speaker cable.

Caution

•Be sure to turn the connected devices off and remove the power cord from the wall outlet beforehand when changing the connection or installation method.

•If you insert the speaker cable too far so

that the insulation is touching the speaker terminal, you may not get any sound. Please insert it with showing the copper wire.

• Check if the end of the speaker cables are securely connected to the terminals by slightly tugging on the cable after making connections. Loose connections may result in sound dropouts or noise.

•If there is a short in the  and  cables caused by an exposed lead wire, excessive load may be applied to the flat screen TV, resulting in interrupted operation or malfunction.

•Incorrect connections of the speaker cable to the right or left of the flat screen TV terminals with respect to the polarity may result in insufficient stereo sound effects, delivering poor bass sounds or unstable sound image.

•Bundle the cable without pulling.

5