Connecting the Unit

Connecting the Power Terminal

•Always use the special red battery and ground wire [RD-223], which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

1.Pass the battery wire from the engine compartment to the interior of the vehicle.

•After making all other connections to the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.

Fuse (30 A) Engine

 

Interior of

compart-

the vehicle

ment

 

 

 

Fuse (30 A)

Drill a 14 mm

Positive terminal

hole into the

Insert the O-ring rubber

vehicle body.

 

 

grommet into the vehicle

 

 

body.

 

 

2.Twist the battery wire, ground wire and system remote control wire.

Twist

3.Attach lugs to wire ends. Lugs not supplied.

• Use pliers, etc., to crimp lugs to wires.

Lug

Ground wire

Lug

Battery wire

4.Connect the wires to the terminal.

•Fix the wires securely with the terminal screws.

 

GND terminal

Power terminal

System remote

 

control terminal

 

System remote

 

control wire

 

Ground wire

Battery wire

WARNING

Failure to securely fasten the battery wire to the terminal using the terminal screws could cause the terminal area to overheat and could result in damage and injury including minor burns.

7