A Title (English)

Solderless Terminal Connections

•Do not connect a cord having an exposed core wire to the power terminals of this amplifier (Power terminal, GND terminal, System remote control terminal). Disconnection or breakage of the core wire can cause a fire or short-circuit.

•Since the wire will become loose over time, it must be periodically inspected and tightened as necessary.

•Do not solder or bind the ends of the twisted wires.

•Fasten while making sure to not to clamp the insulating sheath of the wire.

•Use the supplied hexagonal wrench to tighten and loosen the terminal screw of the amplifier. Securely fasten the wire with the terminal screw. However, since excessively tightening the termi- nal screw of the System remote control has the risk of damaging the wire, be careful not to tight- en excessively by observing the status of the wire when tightening.

Connecting the Power Terminal

•We recommend that you use the special red bat- tery and ground wire [RD-228], which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

•Recommended wires size (AWG: American Wire Gauge) is as follows. The battery wire and the ground wire must be same size.

•Use a 10 AWG to 20 AWG wire for the system remote control wire.

Battery Wire and Ground Wire Size

Wire Length

less than

less than

less than

 

4.5 m

7.2 m

11.4 m

 

(14 ft. 9 in.)

(23 ft. 7 in.)

(37 ft. 5 in.)

Wire Size

8 AWG

6 AWG

4 AWG

 

 

 

 

1.Pass the battery wire from the engine compartment to the interior of the vehicle.

•After making all other connections to the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.

Positive (+)

 

 

 

 

 

 

 

 

Engine

 

 

 

Interior of

 

 

 

 

 

 

 

 

compartment

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the vehicle

terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fuse (40 A) ⋅ 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert the O-ring rubber

 

Drill a 13 mm

 

 

hole into the

 

grommet into the vehicle

 

vehicle body.

 

body.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.Connect the wires to the terminal.

•Fix the wires securely with the terminal screws.

System remote

Terminal screws

control terminal

 

 

GND terminal

Power terminal

 

 

Ground wire

Battery wire

System remote control wire

WARNING

Failure to securely fasten the battery wire to the ter- minal using the terminal screws could cause the ter- minal area to overheat and could result in damage and injury including minor burns.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

10

Page 10 Page 12
Page 11
Image 11
Pioneer PRS-D2200T owner manual Connecting the Power Terminal, Battery Wire and Ground Wire Size
Page 10 Page 12

PRS-D2200T specifications

The Pioneer PRS-D2200T is an advanced car amplifier that exemplifies performance and reliability for audio enthusiasts seeking to enhance their in-car sound experience. This compact amplifier delivers impressive power and is designed to offer high-quality sound reproduction, making it an excellent choice for both casual listeners and audiophiles alike.

One of the key features of the PRS-D2200T is its powerful output capability. This amplifier provides a peak power output of 2200 watts, allowing users to drive powerful subwoofers without distortion, ensuring that every beat is felt as well as heard. The RMS output is equally impressive, delivering 1100 watts at 2 ohms, which provides more than enough power to drive even the most demanding speaker setups.

The PRS-D2200T is equipped with Class D technology, which not only enhances efficiency but also minimizes heat production. Class D amplifiers are known for their ability to deliver high power output from a compact form factor, making them ideal for use in restricted spaces like car interiors. This technology also ensures that the amplifier operates smoothly while consuming less power, which is vital for maintaining the vehicle's electrical system.

In terms of customization, the PRS-D2200T features a wide range of adjustable parameters. This includes an adjustable low-pass filter that allows users to tailor the sound to their preferences and the specific audio environment of the vehicle. The amplifier also includes a subsonic filter, which prevents extremely low frequencies from interfering with the overall sound clarity.

A unique feature of the PRS-D2200T is its versatility for different speaker configurations. It can effectively handle both 2-channel and 4-channel setups, making it suitable for driving full-range speakers as well as dedicated subwoofers. This adaptability ensures that users can create a sound system that meets their unique listening needs.

Durability is another hallmark of the Pioneer PRS-D2200T. Its robust construction ensures that it withstands the rigors of life on the road while maintaining consistent performance. The amplifier includes thermal protection circuitry that guards against overheating, ensuring longevity and reliability in various conditions.

In summary, the Pioneer PRS-D2200T is a powerful and versatile car amplifier that combines advanced technologies and features to deliver outstanding sound quality. With its efficient Class D design, impressive power output, and customizable settings, it stands as an excellent choice for anyone looking to upgrade their car audio system and enjoy a superior listening experience.
Top Page Image Contents