Pioneer PRS-D2200T owner manual SpecificationsA Title English, Average current drawn

SpecificationsA Title (English)

Power source	14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system	Negative type
Current consumption	25 A (at continuous power, 4 Ω)
Average current drawn*	8 A (4 Ω for two channels)
	17 A (4 Ω for one channel)
	17 A (2 Ω for two channel)
Fuse	30 A ⋅ 2
Dimensions	301 (W) mm ⋅ 57 (H) mm ⋅ 213 (D) mm
	[12 (W) in. ⋅ 2-1/4 (H) in. ⋅ 8-3/8 (D) in.]
Weight	3.4 kg (7.5 lbs.) (Leads for wiring not included)
Maximum power output	300 W ⋅ 2 (4 Ω) / 1 200 W ⋅ 1 (4 Ω)
Continuous power output	150 W ⋅ 2 (at 14.4 V, 4 Ω, 20 Hz to 20 kHz 1.0% THD)
	600 W ⋅ 1 (at 14.4 V, 4 Ω, 1 kHz 1.0% THD)
	300 W ⋅ 2 (at 14.4 V, 2 Ω, 1 kHz 1.0% THD)
Load impedance	4 Ω (2 Ω to 8 Ω allowable)
Frequency response	10 Hz to 50 kHz (+0 dB, –3 dB)
Signal-to-noise ratio	100 dB (IHF-A network)
Distortion	0.005 % (10 W, 1 kHz)
Separation	70 dB (1 kHz)
	60 dB (100 Hz to 10 kHz)
Low pass filter	Cut off frequency: 40 Hz to 500 Hz
	Cut off slope: –12 dB/oct
High pass filter	Cut off frequency: 40 Hz to 500 Hz
	Cut off slope: –12 dB/oct
Bass boost	Frequency: 50 Hz
	Level: 0, 6, 9, 12 dB
Gain control	RCA: 400 mV to 6.5 V
	Speaker: 1.6 V to 26 V
Maximum input level / impedance	RCA: 6.5 V / 22 kΩ
	Speaker: 26 V / 90 kΩ

Power output ...................................................................................... 150 W RMS ⋅ 2 channels
	(4 Ω and	1 % THD+N)
	600 W RMS ⋅ 1 channel
	(4 Ω and	1 % THD+N)
	300 W RMS ⋅ 2 channels
	(2 Ω and	1 % THD+N)
Signal-to-noise ratio	80 dBA (Reference: 1 W into 4 Ω)

Note:

•Specifications and the design are subject to possible modification without notice due to improvements.

*Average current drawn

•The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers.

15