InstallationA Tit e (English)

CAUTION

• Do not install in:

—Places where it could injure the driver or pas- sengers if the vehicle stops suddenly.

—Places where it may interfere with the driver,

such as on the floor in front of the driver’s seat.

•Make sure that wires are not caught in the sliding mechanism of the seats, resulting in a short-cir- cuit.

•Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Protect all cables and important equipment such as fuel lines, brake lines and electrical wiring from damage.

•Install tapping screws in such a way that the screw tip does not touch any wire. This is impor- tant to prevent wires from being cut by vibration of the car, which can result in fire.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

•To ensure proper installation, use the supplied parts in the manner specified. If any parts other than the supplied ones are used, they may damage internal parts of the amplifier, or they may become loose causing the amplifier to shut down.

•Never replace the fuse with one of greater value or rating than the original fuse. Use of an improp- er fuse could result in overheating and smoke and could cause damage to the product and injury including burns.

CAUTION:

To prevent malfunction and/or injury

•To ensure proper heat dissipation of the amplifier, be sure of the following during installation.

—Allow adequate space above the amplifier for proper ventilation.

—Do not cover the amplifier with a floor mat or carpet.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could

become hot to the touch and minor burns could result.

•Do not install the amplifier on unstable places such as the spare tire board.

•The best location for installation differs with the car model and installation location. Secure the amplifier at a sufficiently rigid location.

•Make temporary connections first and check that the amplifier and the system operate properly.

•After installing the amplifier, confirm that the spare tire, jack and tools can be easily removed.

Attaching the Bass boost remote control

Attach with tapping screws (3 mm ⋅ 10 mm) at an easily accessible location such as under the dash- board.

Tapping screw (3 mm ⋅ 10 mm)

13

Page 13 Page 15
Page 14
Image 14
Pioneer PRS-D2200T owner manual InstallationA Tit e English, Attaching the Bass boost remote control
Page 13 Page 15

PRS-D2200T specifications

The Pioneer PRS-D2200T is an advanced car amplifier that exemplifies performance and reliability for audio enthusiasts seeking to enhance their in-car sound experience. This compact amplifier delivers impressive power and is designed to offer high-quality sound reproduction, making it an excellent choice for both casual listeners and audiophiles alike.

One of the key features of the PRS-D2200T is its powerful output capability. This amplifier provides a peak power output of 2200 watts, allowing users to drive powerful subwoofers without distortion, ensuring that every beat is felt as well as heard. The RMS output is equally impressive, delivering 1100 watts at 2 ohms, which provides more than enough power to drive even the most demanding speaker setups.

The PRS-D2200T is equipped with Class D technology, which not only enhances efficiency but also minimizes heat production. Class D amplifiers are known for their ability to deliver high power output from a compact form factor, making them ideal for use in restricted spaces like car interiors. This technology also ensures that the amplifier operates smoothly while consuming less power, which is vital for maintaining the vehicle's electrical system.

In terms of customization, the PRS-D2200T features a wide range of adjustable parameters. This includes an adjustable low-pass filter that allows users to tailor the sound to their preferences and the specific audio environment of the vehicle. The amplifier also includes a subsonic filter, which prevents extremely low frequencies from interfering with the overall sound clarity.

A unique feature of the PRS-D2200T is its versatility for different speaker configurations. It can effectively handle both 2-channel and 4-channel setups, making it suitable for driving full-range speakers as well as dedicated subwoofers. This adaptability ensures that users can create a sound system that meets their unique listening needs.

Durability is another hallmark of the Pioneer PRS-D2200T. Its robust construction ensures that it withstands the rigors of life on the road while maintaining consistent performance. The amplifier includes thermal protection circuitry that guards against overheating, ensuring longevity and reliability in various conditions.

In summary, the Pioneer PRS-D2200T is a powerful and versatile car amplifier that combines advanced technologies and features to deliver outstanding sound quality. With its efficient Class D design, impressive power output, and customizable settings, it stands as an excellent choice for anyone looking to upgrade their car audio system and enjoy a superior listening experience.
Top Page Image Contents