3.Choose Layer from the submenu.
4.Enter the name of this layer as Text Area.
5.Using the Rectangular Marquee tool (), outline an area for button text.
6.Fill the area with the appropriate color.
Refer to the Color Order Chart in section 4.2 of this manual.
7.Repeat steps 4 and 5 as needed for your custom layout.
8.Fill the remaining space around the text areas with white (RGB: 255,255,255).
9.Move the Text Area layer to above the Thumbnail Mask layer.
The stacking order from top to bottom should now be Text Area, Thumbnail Mask, Thumbnail Area, Button Mask, Button Image, Button Area, Highlight Area (or Subpicture) and Background.
In the example below, the gray bar at the bottom of the layer is the Disc Title block and the colored blocks are button text. The Disc Title and/or button text must be entered through the
10.0COLOR TABLE LAYER
The final layer required for the
Being as this layer is fairly complicated, you may prefer to choose from the Select and Activate highlight colors available on the
If you wish to have highlight colors not available from the
Page 10 of 24