Connections
When making or changing connections, always turn off the power and disconnect the power cord from its outlet.
Also, be sure to read the operating instructions for the other components to which you are connecting these speakers. Do not connect the power cord until all other connections are completed.
Use only the furnished accessory power cord.
In the event that the desired installation requires a longer Link cable than the one provided, purchase a commercially available MINI DIN 8a extension cable and connect it to the furnished Link cable.
WARNING
Do not use a commercially available MINI DIN 8a extension cable alone; always connect it to the Link cable furnished as an accessory with this unit, since malfunctions, fire, or electric shock could result if the furnished cable is not used.
Controller
Note:
!When controller and Link cable are connected, set the speaker’s main LEVEL dial fully counterclockwise to the MIN position, since an unexpected loud sound could be emitted from the speaker in the event the controller and Link cable are suddenly detached.
!When connecting the controller, set the controller’s LEVEL dial fully counterclockwise to the MIN position, then adjust the sound level as desired after the connection is complete. If the connection is performed when the controller’s LEVEL dial is at a high setting, an unexpected loud sound could be emitted from the speaker.
When the controller is connected, the speaker’s main LEVEL dial function is disabled.
If the controller is connected to one speaker’s CONTROL IN connector, use the Link cable to connect that speaker’s CONTROL OUT connector to the other speaker’s CONTROL IN connector.
Link cable (accessory)
Speaker rear panel | Speaker rear panel |
- 6 dB + 6 dB - 6 dB +6 dB | - 6 dB + 6 dB - 6 dB +6 dB |
* Illustration depicts the
Connect to INPUT
DJ mixer | PC | TV | Portable audio |
10En