Connect to the speaker terminals on the rear of the speakers.
•For
Unscrew the terminals on the speaker and insert the striped speaker wire into the red (+) terminal and the other wire into the black
Striped half of speaker cable
Other half of speaker cable
•For all other speakers:
To connect, insert the striped speaker wire into the red (+) terminal and the other wire into the black
black red
Striped half of speaker cable
5 mm
10 mm
Mounting screw
(not supplied)
5 mm to 7 mm
•If you are unsure of the quality and strength of the walls, consult a professional for advice.
•Pioneer is not responsible for any accidents or damage that result from improper installation.
SECURING THE FRONT SPEAKERS
• Using the included screw, tightly secure the metal catch to the backside of the speaker.
Other half of speaker cable
WALL-MOUNTING THE SURROUND SPEAKERS
Before mounting
•Remember that the speaker system is heavy and that its weight could cause the screws to work loose, or the wall material to fail to support it, resulting in the speaker falling. Make sure that the wall you intend to mount the speakers on is strong enough to support them. Do not mount on plywood or soft surface walls.
•Mounting screws are not supplied. Use screws suitable for the wall material and support the weight of the speaker.
•Pass a
•The speaker can incur damage in the event of a fall.
•Do not attach the metal catch directly to the wall. It should only be used in conjunction with reinforced string to prevent the speaker from falling.
Reinforced strings | Metal catches |
Backside of speaker
Pass two reinforced strings through the metal catches, and fasten the speaker to the wall as shown above.
3
En