USING THE EFFECT FUNCTION
2Use the effect select buttons to choose a desired image.
3Touch the image to apply changes.
4Use the CH SELECT dial to select the desired channel.
•In the event no input image is present, the visualizer’s image can be used.
USING TEXT EFFECTS
TEXT effects can be instantaneously set
When master monitor is off
1
2 | 3 |
| |
6 | 4 |
5 | 3 |
|
7
8
9
When master monitor is on
| 1 |
|
|
| 3 |
| |
|
|
|
|
| |||
| 2 |
|
|
|
| ||
|
|
|
|
| 6 |
| |
| 4 |
|
|
|
| ||
|
|
| 5 |
| 7 |
| |
|
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
| 8 |
| |
|
|
|
|
| 9 |
| |
|
|
|
|
|
|
|
|
1 | Effect select | Select and touch the desired effect button | |||||
| buttons | from the 6 TEXT effects. | |||||
|
|
|
|
|
|
|
|
2 | [TEXT BANK] | Touch the text button of your choice from | |||||
| buttons | the 6 texts. | |||||
|
|
|
|
|
|
|
|
3 | TEXT BANK | Rotate the VIDEO FX PATTERN/TEXT | |||||
| display | BANK dial to select a TEXT BANK from | |||||
|
|
|
| the 10 available. | |||
|
|
|
|
|
|
|
|
4 | Effect mode | A: Touch to apply the effect to audio only. | |||||
| select button | AV: Touch to apply the effect to both | |||||
|
|
|
| audio and video. | |||
|
|
|
| V: Touch to apply the effect to video only. | |||
|
|
|
|
|
|
|
|
5 | Video EFFECT | Monitors the TEXT effects. |
| monitor |
|
|
|
|
6 | [TEXT EDIT] | Touch to edit the text of the selected |
| button | [TEXT BANK] button. |
|
|
|
7 | [BPM | Touch to switch the measurement |
| AUTO/TAP] | method of the BPM between AUTO and |
| button | TAP. Pressing the TAP button will also |
|
| switch this to TAP. |
|
|
|
8 | Parameter | Displays the measured BPM and effect |
| display | parameters. |
|
|
|
9 | Beat | Touch to select the multiplication factor |
| button/beat | of the beat calculated from the BPM for |
| display | synchronization of effects. |
|
|
|
1Touch the [BPM AUTO/TAP] button to select the BPM (=Beat Per Minute) measurement mode.
AUTO: The BPM is automatically measured from the input music signal.
TAP: Tap the TAP button with your finger to manually input the BPM.
•Whenever power is first turned ON, [AUTO] is selected by default.
•The selected mode ([AUTO]/[TAP]) will appear in the display.
•When a BPM cannot be measured automatically, the BPM display in the display will flash.
•The measurement range of AUTO mode is BPM=70 to 180.
Depending on the track, the BPM may not be accurately measured. In these cases, use TAP mode to manually input the BPM.
2Touch the effect category button [TEXT].
•The [TEXT] button will light brightly, and the icon will move as an animation.
•The TEXT effect screen will be displayed.
3Select a text effect using the effect select buttons.
•The selected button will appear white, and the icon will move as an animation.
•For a description of each effect, refer to P. 30.
4Choose a text from TEXT BANK.
•Rotate the VIDEO FX PATTERN/TEXT BANK dial to select TEXT BANK and touch the [TEXT BANK] button to select the text.
•The selected button will appear white.
5Use the CH SELECT dial to select the channel to which you wish to apply the effect.
•The selected effect channel display will be highlighted.
•TEXT effects are not supported when [MIC] is selected. Effects are applied to audio only.
6Touch the effect mode select buttons to choose the effect mode.
•The selected button will be highlighted and an animation will appear.
A: An effect will be applied to the audio only.
AV: An effect will be applied to both the audio and video.
V: An effect will be applied to the video only.
• When turning the power ON, [AV] will be selected.
20
En