Pioneer Pioneer SOUND & VISION MIXER, SVM-1000 FADER START FUNCTION, CROSS FADER START PLAY AND BACK CUE PLAY, FADER START FUNCTION

FADER START FUNCTION

FADER START FUNCTION

By connecting the optional Pioneer DJ/VJ DVD Player or DJ CD Player control cable, the channel fader and cross fader can be used to start DVD/CD playback.

When the mixer’s channel fader lever or cross fader lever are moved, the DVD/CD player is released from the pause mode and automatically –and instantly – begins playback of the selected track. Also, when the fader lever is returned to its original position, the DVD/ CD player returns to its cue point (back cue), thus allowing “sampler” type play.

	HI
FADER	CHANNEL
	FADER
START
	CROSS
	FADER
	ASSIGN
	Cross fader lever (A/B)

CROSS FADER START PLAY AND BACK CUE PLAY

When the DVD/CD player assigned to cross fader channel A is set to standby at a cue point, moving the cross fader lever from the right (B) side toward the left (A) side automatically starts play on the channel A DVD/CD player.

When the cross fader lever reaches the left (A) side, the DVD/CD player assigned to channel B goes to back cue (returns to cue point). Also, when the DVD/CD player assigned to channel B is set to standby at a cue point, moving the cross fader lever from the left

(A)side to the right (B) side automatically starts playback on the channel B DVD/CD player. When the cross fader lever reaches the right (B) side, the DVD/CD player assigned to channel A goes to back cue (returns to cue point).

Using the Cross Fader to Start Playback

1Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control.

•The button for the selected channel lights.

2Set the CROSS FADER ASSIGN switch for the selected channel to [A] or [B].

•Select [A] to assign to cross fader channel A (left side).

•Select [B] to assign to cross fader channel B (right side).

3Move the cross fader lever to the full opposite side away from the DVD/CD player you wish to start.

4Set the DVD/CD player to the desired cue point, and engage cue point standby.

•If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point.

5At the instant you wish to start playback, move the cross fader lever (A/B).

•DVD/CD player begins playback.

•After playback has begun, if the cross fader lever is moved fully to the opposite side, the DVD/CD player assigned to the opposite side channel will return to the cue point and enter standby mode (back cue).

Using the Channel Fader to Start Playback

1Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control.

•The button for the selected channel lights.

2Set the channel fader lever to [0].

3Set the DVD/CD player to the desired cue point, and engage cue point standby.

•If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point.

4At the instant you wish to start playback, move the channel fader lever.

•DVD/CD player begins playback.

•After playback has begun, if the channel fader lever is

returned to the [0] position, the DVD/CD player returns to the cue point and re-enters standby mode (back cue).

•Playback control is possible with the channel fader only with the CROSS FADER ASSIGN switch is set to [THRU].

35

En